Product Overview
This molded pulp hair mask insert holds six single-serve treatment pods in a row, with a round well at the end for a jar or a larger component. Each pod sits in its own formed pocket between two ridges, so the capsules are located individually rather than poured into one long channel — which is what stops them turning, stacking on each other or arriving with the foil lid scuffed.
It is a dry-press part: the wall runs 1–3 mm and the surface is matte white with the fibre visible under raking light. That thickness is the reason a pod tray is usually dry-pressed rather than wet-pressed — the ridges between pockets carry compression in a parcel, and a thicker wall holds the dome shape of each pocket after the part is dry. The tray is a single piece, with no folding tabs and nothing to assemble, so it drops into the retail box as it comes off the pallet. Dimensions follow your pod and jar drawings; the capsules in the photographs are the set the sample tool was built around.
Key Product Features
- Six pod pockets in one part — single-serve hair masks, ampoules or treatment capsules are located by the tray itself, so the set is packed by placing pods rather than by laying them into a plastic blister.
- Ridge walls between pockets — at 1–3 mm dry-press, the ridges take the compression a parcel puts on the pack and keep each pocket round.
- Round well at the end — a formed well with a centre boss that locates a jar or bottle base, so a treatment plus accessory set needs one insert instead of two.
- Matte white finish — the display side reads as paper under retail lighting, which suits a clean hair-care shelf without a printed sleeve over the top.
- One material — tray, pockets and well are the same fibre, with no PVC or PET blister, no foam pad and no laminate to strip at end of life.
- Stacks for freight — trays nest and ship flat-packed, so a carton carries more inserts than the equivalent blister-and-carton build.
Hair Care Packing Scenarios
| Product packed | Why this format fits |
|---|---|
| Six-pack of single-serve hair masks | The six pockets match the count as it is sold, so the box opens onto a row of pods rather than a bag of loose capsules. |
| Hair mask plus a leave-in jar | The round well at the end takes the jar, so a mixed set is held by one insert instead of a tray plus a foam pad. |
| Salon and travel treatment kits | Pods are held individually, which suits a kit where one or two capsules are taken out and the rest stay in the box. |
| E-commerce and sampling programmes | The ridge walls take parcel compression, and the tray replaces a blister that would otherwise arrive cracked. |
Material & Eco Advantages
Dry-press white fibre gives a matte, paper-like surface with a wall thick enough to hold a pocket shape — 1–3 mm, against 0.8–1.5 mm for a wet-press card. The insert is one material throughout: no plastic blister, no foam pad, no flocked shell and no laminated film, so the pack separates into the paper stream without a knife. For a hair-care set that matters, because the usual build is a printed carton with a PET blister or an EVA pad inside it, and that combination is the part of the pack a recycler cannot handle.
Food-contact and restricted-substance declarations are available on request: an FDA declaration under 21 CFR 176.170 and 176.180 for the paper components, and a restricted-substance declaration in a RoHS format. These are declarations of compliance for a defined grade rather than certificates held by the converter. PPWR (EU 2025/40) is a regulation that applies to the packaging you place on the market — recyclability, recycled content over time, labelling — not a certification a supplier can hold.
Product Specifications
| Material | Molded plant fibre, white finish (grade confirmed per project) |
| Structure | Single-piece tray, no folding tabs: six pod pockets plus one round well |
| Cavity | Six pockets drawn to single-serve pod dimensions; round well with a formed centre boss, sized to your jar or bottle base |
| Process | Dry-press, 1–3 mm wall, matte white surface |
| Cavity tolerance | ±0.08–0.15 mm; a wet-press version reaches ±0.03–0.05 mm if a tighter pocket is needed |
| Dimensions | Custom — set at the tooling stage from your pod, jar and box drawings |
| Branding | Debossed or printed, confirmed against artwork on the drawing |
| MOQ | 5,000 pcs dry-press; a wet-press version runs from 10,000 pcs. Custom-formed, so no stock-mould route at 1,000 pcs |
| Tooling | From US$2,400, quoted per drawing; paid on the first order, no charge on repeat orders. See the cost and tooling breakdown. |
| Sampling | 10–15 working days |
| Production lead time | 15–20 working days after sample approval |
| Terms | EXW, FOB, CIF or DDU |
Suitable Purchaser Groups
- Hair-care brands moving to single-serve formats — a pod programme needs a tray that counts and separates, not a bag inside a carton.
- Brands replacing PET blisters or EVA pads — the pockets do the job the blister did, in one material that goes into the paper stream.
- Salon and travel retail programmes — the same tray works for a six-pack sold as a kit and for a sampling pack of two or three.
- Brands already running molded pulp packaging — the hanging shampoo pack covers the bottle side of the same range. Single-dose skincare sets use the same pocket logic in a five-vial freeze-dried serum box.
Frequently Asked Questions
How many pods does one tray hold?
Six single-serve pockets plus one round well at the end. The count and spacing are cut into the tool from your pod drawing, so a tray for five or for eight is a different mould rather than a different setting.
Will the pods move around in transit?
Each pod sits between two formed ridges that follow the capsule’s dome, so it is held on its shoulder rather than loose in a round hole. That is a claim worth testing rather than assuming: we ship samples for a drop test under ISTA 3A before the tool is committed.
Can the round well hold a jar instead of a pod?
Yes. The well is drawn from the component it carries, and the centre boss is formed to locate a jar or bottle base. Give us the base diameter and the depth and the well follows them.
What is the minimum order quantity?
5,000 pcs for this dry-press tray. If a thinner, smoother wall suits the brief, a wet-press version runs from 10,000 pcs. Both are custom-formed, so there is no stock-mould route.
Is the tray recyclable?
It is one material throughout — moulded plant fibre, with no plastic blister, foam pad or laminate to separate — so it goes into the paper stream. A coated or laminated grade would change that, which is why the finish is agreed on the drawing rather than assumed.
CTA Closing Copy
Send the pod drawing — dome diameter, base diameter and height — plus the jar base if the round well has to carry one, and the internal dimensions of the box the tray sits in. We will confirm the pocket count, the ridge spacing that keeps pods apart and the wall thickness that survives your parcel route, before a tool is cut. Sampling takes 10–15 working days; production runs 15–20 working days after approval.
If the material is new to your team, start with what molded pulp packaging is. For the decision this tray usually sits inside — whether the set should be fibre or thermoformed at all — the cosmetic packaging selection guide covers cavity tolerance, MOQ and the documents a retailer asks for.












